How to assemble your Ron Fletcher Reformer
IN CASE OF FREIGHT DAMAGE
If there is freight damage, make certain you keep all packaging
material. Please call Balanced Body within three business days.
PARTS LIST (INCLUDED):
Description
Part Number
Qty
Short Foot Strap
101-111
1
Wool Fuzzies
101-022
1
Extension Stopper
200-211
1
Shoulder Rest
707-087
1
Standard Sitting Box
721-002
1
Leather Straps
950-052
1
Extension Straps (pair)
101-010
1
4-Hook Springbar
950-054
1
Red Springs Open Hooks
SPR9007
4
SHOULDER REST HARDWARE
Item Description
Part Number Qty
A
Flat Head Allen Bolt 1/4-20 x 2 3/4
GEN9249
2
B
Eyebolt
GEN9231
2
C
Large Washer 1/4”
GEN9204
4
D
Small Washer
GEN9305
2
E
Finish Washer
210-050
2
F
1/4” Lock nut
GEN9021
4
TOOLS NEEDED
(NOT INCLUDED):
»
Flathead Screwdriver
»
7/16” Wrench or adjustable
end wrench
INSTALL THE CARRIAGE
Turn the carriage over and clean all the wheels of shipping dust,
etc. Clean the full length of the rail surfaces inside the frame.
Carefully place the carriage into the frame with the headrest
facing away from the footbar.
ATTACH THE SPRINGS
To attach the springs, hook them to the eyebolts on the
underside of the carriage. The hooks of the spring should be
facing downward. Place the spring bar into the gear slots located
inside the frame near the footbar. Make sure the eyebolts are
facing the carriage. Move the carriage toward the foot-end of the
Reformer and attach the springs to the eyebolts on the spring
bar.
INSTALL THE SHOULDER RESTS
1. Position the shoulder rest with the metal flange over the
drilled holes in the wooden block next to the headrest.
2. Install the Allen bolt in the hole closest to the shoulder rest.
(Figure B.)
3. Install the eyebolt with the finish washer and a small washer
into the other hole. See Figure B.
4. On the underside of the
carriage, put one large
washer and a hex nut on
the end of the Allen bolt
and eye bolt and tighten.
Figure B
Figure A
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-116 | 12.28.18
