Assembling the Balanced Body
®
CenterLine
®
Reformer
DESCRIPTION
PART NO.
QTY.
Gondola Pole
720-006
1
Short Box Dowel
607-128
1
Kneeling Pads
108-018
2
Sitting box
721-010
1
Cotton Foot Strap
607-349
1
Extender Straps
607-343
2
Leather Straps
607-482
2
Handles
950-161
1 pair
Green Springs
SPR9360
4
No Roll Springbar
607-323
1
Detachable Shoulder Assembly
N/A
2
Detent Pin w/Lanyard
N/A
2
Screw with locking knob
N/A
2
Carriage Exension Stopper
200-211
2
INSTALL THE CARRIAGE
Clean all the carriage wheels and the metal rail surfaces of
the frame. Carefully place the carriage into the frame with the
headrest facing away from the footbar.
INSTALL THE STRAPS
Place strap handles over shoulder
rests. Insert the end of leather strap
with the black fabric through the
caster (rough leather side is against
the caster) as shown in Figure A.
Guide the strap through the silver loop under the carriage as
shown in figure B. Depress the metal lever on the clip and guide
the black end of the strap through. It is important that the black
strap goes through the clip as shown in Figure C. Adjust until
strap is tight.
Note: straps would need to be adjusted if the springbar is moved
to a different gear.
ATTACH THE SPRINGS TO THE
UNDERSIDE OF THE CARRIAGE
Attach one spring to each eye-bolt on
the underside of the carriage as shown
in Figure D. The open end of the spring
hook should be facing down.
INSTALL THE SPRINGBAR
Place the springbar with hooks facing up into
the gear block as shown in Figure E.
A.
Footbar
B.
Carriage
C.
Sitting Box
D.
Gondola Pole & Dowel
E.
Straps
Figure A: Straps and Carriage
Extension Stopper.
Figure B
Figure D: Springs at rest
Figure E: Springs and Springbar.
Optional 5th Spring
Springbar
in gear
Figure C: Metal clips for attaching straps
to under carriage.
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-312 | 03.07.19
