Baker Panametrics PanaFlow LC, Руководство пользователя, Страница: 47 / 68

PanaFlow™ LC User’s Manual 39
Chapter 4. Error Codes and Troubleshooting
S11: Clock Frequency Clock frequency error Fault: Input clock frequency failure. Try power
cycling the meter. If error persists after power cycle,
contact Panametrics factory
S12: CPU CPU error Fault: CPU registers have stuck bits. Try power
cycling the meter. If error persists after power cycle,
contact Panametrics factory
S13: Invariable Flash
Memory
Flash memory fault Fault: Flash memory test failed. Try power cycling
the meter. If error persists after power cycle, contact
Panametrics factory
S14: Invariable SRAM Invariable SRAM fault Fault: Invariable SRAM memory test failed. Try power
cycling the meter. If error persists after power cycle,
contact Panametrics factory
S15: Variable Memory Variable SRAM fault Fault: Variable SRAM test failed. Try power cycling
the meter. If error persists after power cycle, contact
Panametrics factory
S16: FPGA Config FPGA configuration error Fault: FPGA configuration validation failure. Try
power cycling the meter. If error persists after power
cycle, contact Panametrics factory
S17: Temperature Temperature error Error: Temperature of the electronics is outside the
pre-defined operating range. Make sure that the
ambient temperature is not outside the meter
operating range
S18: Driver Fault Driver failure Fault: Driver failure. Try power cycling the meter. If
error persists after power cycle, contact
Panametrics factory
S19: Watch Dog Failure Watch dog failure Fault: Watch dog test failed. Try power cycling the
meter. If error persists after power cycle, contact
Panametrics factory
S21: Stack Overflow Stack overflow Fault: Stack overflow. Try power cycling the meter. If
error persists after power cycle, contact
Panametrics factory
S22: Sequence or Window
Watchdog
Sequence failed Fault: Sequence failure detected. Try power cycling
the meter. If error persists after power cycle, contact
Panametrics factory
S23: Initialization Failed Initialization failed Error: Initialization failed. Please verify all the
configuration parameters. If error persists, contact
Panametrics factory
S24: DSP Hardware Errors DSP hardware failed Fault: DSP hardware failure detected. Try power
cycling the meter. If error persists after power cycle,
contact Panametrics factory
S25: DSP Exception DSP exception Fault: DSP exception. Try power cycling the meter. If
error persists after power cycle, contact
Panametrics factory
S26: Default ISR Exception within the ISR Fault: Exception within the ISR. Try power cycling the
meter. If error persists after power cycle, contact
Panametrics factory
S27: DSP Reset ISR Exception within the DSP ISR Fault: Exception within the DSP ISR. Try power cycling
the meter. If error persists after power cycle, contact
Panametrics factory
S28: Software Fault Software malfunction Error: Software malfunction. Try power cycling the
meter. If error persists after power cycle, contact
Panametrics factory
Table 4: System Error Description and Recommended Actions
Error Code Error Message Description / Recommended Action