Baker Panametrics CTF878, Руководство по программированию, Страница: 45 / 88

Model CTF878 Programming Manual 39
Chapter 2. Displaying and Configuring Data
2.6.1 Specifying the Number of Displayed Parameters
As mentioned earlier, the CTF878 can display one to four different measurement parameters simultaneously.
However, sometimes you might wish to display only one or two parameters. To change the number of open display
windows from within the Site Menu (shown in Figure 42 on page 38), use the [

]or [

] arrow keys to move to the
desired number of views (1 View, 2 Views, etc.). Press [ENTER] .
The screen displays the designated number of windows. For
example, Figure 43 below shows the screen displayed in Figure 39 on page 36, reconfigured for a single view.
Figure 43: Display Screen Configured for Single View
Note: The CTF878 opens display windows from left to right and from top to bottom, starting from the upper left;
that is, if you press “1 View,” the parameter displayed in the upper left window appears. If you press “2 Views,”
the parameters shown in the two top windows appear. The view for “3 Views” adds the window in the lower
left, and that for “4 Views” adds the window in the lower right.
-10000
10 Minutes
10000
0
-5000
-2000
2000
5000
Save Now
Program Meter Logging Service
Velocity, m/s
Site