Baker Panametrics CTF878, Руководство по программированию, Страница: 43 / 88

Model CTF878 Programming Manual 37
Chapter 2. Displaying and Configuring Data
The screen appears similar to Figure 40 below.
Figure 40: Line (or Bar) Graph Parameters Window
5. The first prompt asks for the minimum value shown in the graph.
a. Press [ENTER] to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm the value.
6. Repeat the procedure in step 5 to enter the maximum value.
A line graph involves two more prompts.
7. The next prompt asks for the display interval.
a.
Press
[ENTER]
to open the text box. Use the numeric keys to enter the desired number. Press
[ENTER]
to confirm the
value.
b. The second box asks for the interval in terms of seconds, minutes, hours, or days. Press [ENTER] to open the
drop-down menu, and then press the [

] or [

] keys to move to the desired parameter. Press [ENTER] to
confirm the entry.
8. The final three prompts ask for details of the graph configuration: if you want to use lines, plot the average value,
or show the minimum and maximum values. Press the [

] key to step through each value, and press [ENTER] to
add a given detail as part of the graph.
9. When you have configured the graph, press [F3] (OK) to confirm the graph settings, or press
[
F2
]
(Cancel) to
cancel the changes.
The screen returns to Operate Mode, and displays any changes.
2.5 Measurement Option
On occasion, you might need to change the actual parameter measured in a given window.The Measurement option
enables you to reconfigure the window with one of several categories of data and appropriate English or metric
measurement units.
To enter the Measurement option:
1. Press [SEL] from the Operate Mode window until you have reached the measurement you want to replace.
2. Press [ENTER] to open the Display Menu.
3. Be sure the Measurement option is highlighted, and press [ENTER] .
The screen appears similar to Figure 41 below. The left column displays categories of data, while the right column
displays English and metric measurement units (or, with the Diagnostics source shown, a list of diagnostics
parameters).
OK Cancel
Use Lines
Plot Average Value
Show Minimum and Maximum
Minimum
Maximum 10000
10 Minutes
Tau
Set Line Graph Parameters
-10000