Baker Panametrics CTF878, Руководство по программированию, Страница: 41 / 88

Model CTF878 Programming Manual 35
Chapter 2. Displaying and Configuring Data
Chapter 2. Displaying and Configuring Data
2.1 Introduction
The CTF878 enables the viewing of from one to four different measurement parameters simultaneously. The screen
can show these parameters not only in numeric format, but as line or bar graphs as well.
You can configure any given measurement for your particular requirements. To configure an individual
measurement, press [SEL] from the Operate Mode window. A cursor appears next to the parameter closest to the
upper left corner. Continuing to press [SEL] enables the cursor to scroll through the other displayed measurements.
Once you have reached a particular window, pressing the [ENTER] button opens the menu for that window, as shown
in Figure 37 below. To learn how to use the display window menu, go to Format Option on page 35, View Option on
page 36, and/or Limits Option on page 36.
Figure 37: Display Screen After Pressing [SEL]
2.2 Format Option
Format, the first option on the menu, allows you to specify the type of notation and the number of decimal places for
the measurement in that window. Press [ENTER] and the submenu shows two options: Format and Decimal Places.
Press the [

] or [

] arrow keys to select either entry, and press [ENTER] . The screen appears similar to Figure 38
below. To scroll to a particular parameter or menu entry, press the [

] or [

] key.
Note: If the window displays a line or bar graph, the Measurement option appears instead of Format in the menu.
Figure 38: Number Format Window
site02 2003/07/17 03:35 PM
Format View Measurement
Save Now
34
Velocity, m/s
Volume, m/s
Corr SNR Cross Corr
Format
, m/s
Programming
Format
OK Cancel
Decimal Places
Default
Fixed Decimal
Scientific
Number Format
Default