Baker Panametrics CTF878, Руководство по программированию, Страница: 28 / 88

Chapter 1. Programming Site Data
22 Model CTF878 Programming Manual
2. Scroll to the next prompt and select the Data Source measurement type from a list of choices (see Figure 26
below).
a.
Press
[ENTER]
to open the window.
b. Scroll to the desired output type.
c. Press [SEL] to confirm your selection.
d. The prompt then moves to a list of unit types. (The available units depend on the selection made at the Data
Source prompt.) Scroll to the desired output unit.
e. Press [F3] (OK) to confirm your selection.
Figure 26: Data Source Selection Window
3. Scroll to the next prompt and press [
ENTER
] to select or deselect the
Failsafe
option. If
Failsafe
is selected, an X
will appear in the box.
4. The next prompt asks for the Trigger Point frequency:
a.
Press
[ENTER]
to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm your selection.
OK Cancel No Unit
AuxIn
Pressure
Volume
Fwd Totalizer
Rev Totalizer
Temperature
m/s
DIAG
StdFwd Totalizer
Select Measurement
Velocity