Baker Panametrics CTF878, Руководство по программированию, Страница: 11 / 88

Model CTF878 Programming Manual 5
Chapter 1. Programming Site Data
1.5 Entering the Program Menu
To enter the Program Menu, press the [MENU] key at the lower right of the CTF878 keypad. The Menu Bar replaces the
Status Bar at the top of the screen. Press the [

] arrow key once to scroll from the Site Menu to the Program Menu. At
the Program Menu, press [ENTER] . The screen appears similar to Figure 4 below. While following the programming
instructions, see the Program Menu Map , Figure on page 29.
Figure 4: Program Menu
To scroll to a particular option, press the [

]or [

] arrow keys until you reach the option. Then press [ENTER] to
open the option window.
When entering parameters in an option, press:
• The [

] key to step through the available parameters
• The [

] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any time and return to Operate Mode without
changing the parameters.
Note: The Transducer, Pipe, Fluid and Path parameters are categorized under the same Transducer/Pipe menu, as
shown in Figure 5 below. You can be more time-efficient by programming the parameters in all four entries
under Transducer/Pipe before exiting the menu.
When you are highlighting a parameter in one of the four entries, and you wish to go to another entry:
1. Use the [

] key to scroll up to the current tab (the entry that you are under).
2. Press the [

] or [

] key to select the parameter you want to access, then press [
ENTER
].
Site Meter Logging Service
Pipe
Fluid
Path
IO
Standard Volume
User Functions
Correction Factors
0 50 100
Program
Transducer
elocity, m/s
Cross Corr