398D003 Rev C
6 of 15
IV – MANUAL LIFTING OF THE BDINQ400
REDUCING THE LIFTING WEIGHT OF THE CABINET
Step 1
: Supporting the supply diffuser with one hand, remove the securing hardware with an
11/32 ratchet wrench or nut driver. Using two hands lower the front edge of the diffuser down.
Then while holding the edge firmly, carefully pull it forward off its rear mounting studs and
remove it from the cabinet work area. Use caution to avoid damaging the HEPA filter.
Step 2
: Remove the exterior and interior touch screen mount and label printer cover
Step 3
: Remove the two 1/4-20 button head screws from the lower left and right side of the
fascia panel
