Baker Hughes Panametrics XDP, Руководство пользователя

Страница: 57 / 64

47
Appendix D. Factory default settings
D.1 Introduction
Prior to shipment, each XDP is programmed with values that
are suitable for many applications. Although these values
are readily reprogrammed to meet specific application
requirements, the default values usually allow for a quick
and easy initial startup of the instrument.
D.2 Default values
The default values for an XDP using the standard software
(E=1) are listed in the following sections.
D.2.1 Display
Gas label: O2 gas unit: %
Gas resolution: 0.01
D.2.2 Cal data
Cal points: 2 points
Cal table: 0.00/4.00, 20.0, 100.0
D.2.3 4-20 mA input
INPUT_UNDER_RANGE_LIMIT: 2.0
INPUT_OVER_RANGE_LIMIT: 22.0
D.2.4 Slot analog output
Type: 4-20mA
Zero setpoint: 0.0
Span setpoint: 100
All error handlers: Disabled
Error handler: No effect
Error handler force to value: 0.0
D.2.5 Alarms
Trip point: HH=100, H=100, L=0, LL=0
Deadband: 0.2
Type: Non-fail-safe
D.2.6 AutoCAL
Type: offset cal
Zero/span cal type: span gas first
Zero setpoint : 0.0
Span setpoint: 100
Offset cal setpoint: 0.0
Slope cal setpoint: 20.93 zero drift/cal: 0.0
Zero drift/total: 0.0
Span drift/cal: 0.0
Span drift/total: 0.0
Verify drift/cal: 5.0 (verification limit)
Max drift/cal: 10.0 (cal limit)
Max drift/total: 25.0 (cal limit)
Analog output indication: Hold last value
Analog output force to value: 0.0
Zero gas ON: 4.0 min.
Span gas ON: 4.0 min.
Gas settling time: 2.0 min.
Measuring time: 0.25 min.
Schedule AutoCAL: MM/DD/YY = 12/31/99
HH:MM = 01:01
Interval type = days
Interval = 1
AutoCal: disabled
Auto verification: disabled