Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 41 / 138

3.4.1.3 Entering the error limits
The error limits option enables setting limits for the acoustic signals. If a signal falls outside these programmed limits, an error
code is displayed. To set the error limits, refer to Figure 45 below and complete the steps on the next page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Figure 45: Entering the error limits
NOTE: To select channel 2 to
channel 8, highlight the option
and press  key twice to
confirm the selection. Once you
confirm your selection you will
see the next screen.
The

arrow on the screen
usually indicates there are
more options below and
the

arrow can be used to
scroll to those options.
Use

or

arrow to highlight the “error
limits…” if not already highlighted.
Legend
Red At least user 1 level access required to follow the step.
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Green Option only visible to user 3 or above.
31