Baker Hughes Panametrics Sentinel LCT8, Руководство пользователя

Страница: 37 / 138

3.3.3 Changing the access level
The user can change the access level in two ways:
• From
measurement view
• From user configurations
3.3.3.1 Changing the access level from
measurement view
To change the access level from measurement view , refer to
Figure 41 below and complete the following steps:
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. From measurement view , use the [

] and [

] keys to
highlight the security level icon (at least display locked
access level is required to make these changes).
2. Press the [

] key to access the security options list.
3. Use the [

] and [

] keys to highlight the desired security
level option.
4. Press the [

] key twice confirm your selection.
NOTE: The example screens shown above are for admin level
access. The options vary for other access levels.
Figure 41: Setting the security level from measurement view
NOTE: The options shown are
based on user admin access.
Other access level options vary.
Use

or

arrow to highlight the
“security level” option you want to
select and press  twice to confirm
selection.
NOTE: The arrows in this figure are magenta and indicate at least “display locked” access level is required to follow
these steps.




27