Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 81 / 174

AquaTrans™ AT600 User’s manual 71
Chapter 4. Initial setup and programming
4.7.9 Programming the fluid temperature
Note: Because the meter calculations are based on customer inputs, the fluid temperature affects the speed of
sound used during a measurement.
Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that digit
as required. After all digits are correct, press [√]
to save. Then, press [x] to return to the previous
screen.
Select fluid temperature in the sensor setup
menu, and press [√]. The following screen
opens.
Press [√] again, and a screen similar to the
following opens.
Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that
digit as required. After all digits are correct,
press [√] to save. Then, press [x] to return to
the previous screen.