Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 67 / 174

AquaTrans™ AT600 User’s manual 57
Chapter 4. Initial setup and programming
Note:
The units shown are the units selected in the units setting menu.
4.7.2 Mounting type
4.7.2.1 Setting the mounting type
Select zero cutoff and press [√]. The following
screen opens.
Press [√] again, and a screen similar to the
following opens.
Use the [

] or [

] key to select a specific digit, then use the [

]
or [

]key to change that digit as required. After all digits are
correct, press [√] to save. Then, press [ ? ] to return to the
previous screen.
Select mounting type and press [√]. The
following screen opens.
Select clamp-on if need and press [√] to
return to the previous screen.