Baker Hughes Druck PACE, Руководство по калибровке

Страница: 10 / 26

Copyright 2010 Baker Hughes Company.
6 | PACE Calibration Manual–English
5.1.2 Pressure Connection
The PACE has parallel thread pressure connectors. Use only the connector type specified in
Table 2.
IO-ADAPT-1/8NPT ISO 228 G1/8 Male to 1/8 NPT Female.
IO-ADAPT-7/16UNF ISO 228 G1/8 Male to 7/16-20 UNF Female.
IO-ADAPT-AN4 ISO 228 G1/8 Male to AN4 37° Male.
IO-ADAPT-AN6 ISO 228 G1/8 Male to AN6 37° Male.
IO-ADAPT-BARB ISO 228 G1/8 Male to 1/4 Hose.
IO-ADAPT-G1/4 ISO 228 G1/8 Male to ISO 228 G1/4 Female.
IO-ADAPT-G1/8 ISO 228 G1/8 Male to ISO 228 G1/8 Female.
WARNING
Parallel threads must be used. Female thread type is parallel
thread to ISO228/1 (DIN ISO228/1, JIS B0202) G1/8.
Tapered threads not allowed.
Table 2: PACE Pressure Connector Thread Specification
PACE Connector Thread Specification
, Supply -, Output,
Vent, Reference
ISO228/1 G1/8 Parallel Threads (DIN ISO228/1, JIS B0202)
Table 1: Pressure Adaptor Specification
Adaptor Part Number Specification