Baker Hughes Apollo 3, Руководство пользователя

Страница: 188 / 277

Copyright 2020 Baker Hughes Company. All rights reserved. Page 188 of 277
Table 44: Miscellaneous Settings (cont'd.)
Name Location Description
Screen Timeout Home Screen ->
Settings ->
Menu -> Other Initial Setup
(page 3)
The Apollo LCD display will be
turned off when the keypad is
inactive for the Screen Timeout.
Note that any logged in user will
be logged out at the same time
the screen is turned off.
The default value is 10 minutes.
Group Memberships Home Screen ->
Settings ->
Menu -> Other Initial Setup
(page 3)
Group Memberships allow
a SCADA system to send a
“Broadcast” group shutdown
command to all drives on a
network. The group shutdown
command will contain a 16 bit
shutdown mask. If a logical AND
of the Group Membership and
the shutdown mask results in a
non-zero value, Apollo will shut
down the drive.
The default value is 32768 (bit 15
set).
5.24 SPS Setup
The most complex applications faced by the Apollo Control System are Surface Pumping System (SPS)
applications.
In the past, complex SPS applications required an expensive Programmable Logic Controller (PLC) to
handle such applications. The Apollo Intelligent Control System can handle the vast majority of such
systems. SPS Specific Functionality built in to Apollo includes:
• Startup Sequencing
• Charge Pump control
• Suction Pressure Monitoring
• Discharge Pressure Monitoring
• Pump Curve Monitoring
• Lube Pump Control
• Lube Oil Pressure/Flow Monitoring