BAK PLANON, Руководство по эксплуатации

Страница: 11 / 20

BAK Thermoplastic Welding Technology AG
11
ASSEMBLY INSTRUCTIONS FOR ACCESSORY NO. 2:
ADJUSTMENT OF THE WELDING SEAM
Art.no. 5230155 Art.no. 5230156 Art.no. 5230157
Overlap nozzle 20mm Overlap nozzle 30mm Overlap nozzle 40mm
Pressure roller 20mm Pressure roller 30mm Pressure roller 40mm
Required tools: Torx wrench TX20, Allen key SW5, Spanner SW10/17
2.0. Adjustment of the welding seam width to 20 / 30 / 40mm:
2.1. Switch off the device
2.2. Unplug the tool
2.3. Disassemble the nozzle (Torx TX20) 2.4.Fix the required nozzle (20, 30 or 40mm) 2.5. Adjust the holder to the
(pay attention to position) nozzle width (SW10/Allen key SW5)
2.6. Remove the round belt 2.7. Disassemble the pressure roller (Allen key SW5) 2.8. Fix the required ( same witdh as
nozzle) pressure roller
(Fixation snaps)
2.9. Fit the round belt 2.10. Mount the hand tool (Torx TX20) 2.11. Adjustment see page 4
38-42mm
Distance between outer edge nozzle and
pressure roller approx.2.0mm
2.12. Adjust the guide roller (SW17)
Space for welding line with
10mm
20mm
20mm 30mm
30mm 40mm
Fasten all screws and nuts!!!
Position of 2.4.