1
2
3
4
5
Remove the paper backing and apply the seal
strip to the top of the bulkhead. Trim the ends
to tightly fit to the sides of the bed. Apply along
the radius of the bulkhead back edge.
NOTE: Wipe the surface with isopropyl alcohol
before applying.
NOTE: Installations with a drop-in bed liner
will NOT require the bulkhead seal.
BULKHEAD SEAL STRIP INSTALLATION
INSTALLATION SHEET
Parts will be shipped to you directly.
Call 818-365-9000 Mon - Fri 8:30 am - 7 pm EST
or email [email protected]
1 Hard Folding Cover
2 RH, passenger side rail
3 LH, driver side rail
4 Prop rod
5 Prop rod clip
6 Buckles
7 Buckle mounting inserts
8 Buckle mounting screws
9 Bulkhead seal
27 Allen wrench
28 Washers, retainer
29 Spacers
30 Screw & washers, M6
31 Cab bumpers
32 Jack nut installer wrench
10 Drain hoses
11 Cover mounting elevator bolts
12 Cover mounting rubber washers
13 Cover mounting washers
14 Cover mounting lock washers
15 Cover mounting knob
A
16 Well nuts
17 Washers, oversize #10
18 Screws, buttonhead
19 Screw and washers, truss head
B
20 Well nuts
21 Washers, flat
22 Washers, oversize #10
23 Screws, buttonhead
24 Jack nuts
25 Washers, flat
26 Bolts 1/4-20
1
• 1100 N. Glenstone Ave. Suite 140, Springfield, MO 65802 • 818-365-9000 • bakindustries.com Part# 318B0047 Rev. 8.12.2020
BAK Industries
Laurmark Enterprises, Inc., 2020
•
TOOLS RECOMMENDED
7/8”, [0.875”, (22mm)] drill bit & drill (optional)
Philips screwdriver
1/8” Hex head
T50 Torx drive
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6
7
8
9
10
12
11
13
14 15
A
B
16
20
24
22
23
25
26
27
32
30
28
29
31
21
17
18
19
•
•
Any damaged or missing parts?
Jeep Gladiator
NOTE: The rail installation will require identifying the bulkhead hole configuration of your truck.
This will determine which hardware package, A or B, is used. This is in step 6.
