Any damaged or missing parts?
INSTALLATION SHEET
Parts will be shipped to you directly. Call 844-779-8986
Mon - Fri 8:30 am - 7 pm EST or email [email protected]
1
2
Make sure the
clamp is inserted
all the way up
into the rail and
clamp teeth are
alinged to rail
slots to ensure
a secure grip.
3
Make sure
the rail is
clamped
square as
shown.
Start at the
front, and
place the
first clamp
approx 6 to 9
inches back.
4
Close tailgate.
Place BAKFlip rail
on truck bed with
silver bracket all
the way forward
and toward the
center of bed as
shown. Refer to
enclosed
Spacing
& Shimming Sheet
for more details.
Rails should be
completely level.
If the truck
does
not
have a drop
in bedliner, install
the cab/bulkhead
seal (weather
strip). Wipe paint -
ed surface with
isopropyl alchol
before applying.
If the truck has a
drop in bedliner,
no seal will be
needed.
NOTE:
Some drop in liners may require trimming
in the corners to fit the rail in the opening.
TOOLS RECOMMENDED
9/16 Wrench or socket
7/8 Drill bit & drill (optional)
Philllips screwdriver
SELECT SYSTEMS ONLY!
(not pictured)
8 x Angle shims
2 x Spacer shims
•
1 HARDWARE BAG INCLUDING
•
6 x Clamps (8’ ft trucks incl.
8 ea)
•
2 x Elevator bolt (w-large
flat head)
•
4 x Rubber washers
•
2 x Large flat washers
•
2 x Lock washers
•
2 x Star knobs (thumb screws)
•
2 x Buckle ends
•
4 x Machine screws
•
4 x Threaded posts
PARTS INCLUDED IN YOUR KIT
•
1 x Hard folding cover assembly
•
3 x D Shaped cab bumpers
•
1 x Bulkhead seal
(¾ x ¾ x truck width)
•
1 Pair rails (L&R)
•
•
•
2 x Drain hoses
2 x Prop rods
2 x Prop rod clips
• 1100 N. Glenstone Ave. Suite 140, Springfield, MO 65802 • 844-779-8986 • bakindustries.com Part# 318A0029 Rev. 1.8.2020
BAK Industries
Laurmark Enterprises, Inc., 2020
•
