background image

31  

Service  Support  -  M/C

Service Station Manual

Cranking ON & OFF Control

Fuel Tank Cap

 “Cranking ON and OFF duration” control:

• During Engine crank cycle cranking is allowed only for fixed duration and in between successive cranks (in case 
engine does not start) here is a   cooling off period.

• Cranking on-off duration control feature to avoid battery discharge-
- 1st Crank ON (5 sec) & Disable for 2 sec.
- 2nd Crank ON (5 sec) & Disable for 2 sec.
- 3rd Crank ON (5 sec) & Disable for 10 sec.
After a gap of 10 sec cranking cycle continues.

SOP to prevent fuel stains on petrol tank 

•  After  petrol  refilling  &  before  shutting  the  cap  wipe  the 

spilled petrol from the painted areas around the cap by soft 
dry cotton cloth. 

 

•  Shut and lock the cap fully. 

•  This practice needs to be followed to maintain the shine 

of color on petrol tank. 

Glossy Finish Painted Parts Cleaning

Do’s:

· 

Use Colin or caustic free detergent solution for 

cleaning.(1 spoon in ½ bucket)

 

Remove foreign substances like insect remains, road 

debris using a soft brush. 

· 

Use microfiber cleaning cloths Ex.- Muslin cloth for 

painted parts cleaning.

· 

Use recommended 3M polish.

 Don’ts:

· 

Do not use products that are even mildly abrasive, such 

as polishes, glazes, or rubbing compounds.

· 

Do not use mechanical cleaners/polishers.

· 

Do not use terrycloth or paper towels or shine 

enhancement products. 

· 

Do not rub the finish vigorously, this will burnish the 

paint finish, causing a permanent shiny spot. Shiny 
spots cannot be removed.

CONTROL SWITCHES / IGNITION SWITCH / HEADLIGHT /SIDE STAND INFORMATION

Содержание pulsar F250 2022

















































Отзывы: