Bailey infi 90 IMASI03, Инструкция

Страница: 93 / 105

FUNCTION CODE DEFINITIONS
ENHANCED ANALOG INPUT DEFINITION FUNCTION CODE (FC 216)
C - 6 I-E96-301B
®
S1 This specification contains the expander bus address of the
analog slave input module (IMASI03).
S2 This specification contains the block address of the next
enhanced analog input definition (function code 216) function
block describing one of the channels on the slave module. A
value of 2 in this specification indicates that this block is at the
end of the linked list.
S3 This specification contains the number of the input channel on
the slave described by this function block.
S4 This specification defines the input signal type of the input
from the IMASI03. Table
C-7 lists the type codes for the various
recognized input types.
For input signals which specify a defined range (for e1
to +5 V) any signals detected to fall five percent outside of that
range will be marked as bad quality with a status indication of
out-of-range.
Table C-6. FC 216 Specifications
Spec
No.
Tune
Default
Value
Data Type
Range
Min. Max
Description
S1 No 0 INT(2) 0 to 63 Slave Address
S2 No 2 INT(2) 0 to 9998 Block Address of next enhanced
Analog Input Definition (FC216)
S3 No 1 INT(2) Full Slave Input Channel Number
S4 No 1 INT(1) Full Input Signal Type
S5 No 0 INT(1) 0 to 1 EU Conversion Type:
0 = Degrees C
1 = Degrees F
S6 Yes 0.0 REAL(3) Full EU Zero of input
S7 Yes 0.0 REAL(3) Full EU Span of input
S8 No 0.0 REAL(3) Full Input Signal Range Low Limit
S9 No 0.0 REAL(3) Full Input Signal Range High Limit
S10 No 0.0 REAL(3) Full Lead wire resistance (Ohms)
S11 No 16 INT(1) 16 - 24 A/D Conversion Resolution (Num-
ber of bits)
S12 No 0 INT(2) Full Spare parameter
S13 No 0 INT(2) Full Spare parameter
S14 No 0.0 REAL(3) Full Spare parameter
S15 No 0.0 REAL(3) Full Spare parameter