INSTALLATION
OPERATOR INTERFACE DEVICES
3 - 26
I-E96-192-5A
®
NADS03 Annunciator Display Panel
The NADS03 annunciator display panel (ADS) provides a panel
of 64 lamps and pushbuttons and is only used on the
IIOCI423 environmental model. Each LED is assigned to a tag.
Each pushbutton may be assigned to a display or a key macro.
When a tag goes into an alarm condition, the assigned LED
turns on. Press the pushbutton to call the display or key
macro assigned to it.
Up to four annunciator display panels can be driven from an
MKM module. Maximum cable length is 4.5 meters (15 feet).
Refer to Figure
for the dipswitch configuration of the first
annunciator display panel.
Figure 3-20. IIADP02 Annunciator Display Panel
BACK OF
ADP PANEL
ADDRESS
SWITCH
PC
BOARD
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
OPEN
SW 1
SW1
ADP
1
ADDRESS SWITCH
SETTINGS
TO MKM
BOARD
(26 PIN)
TP35495C
.
P2
P4
P1
POWER
IN CABLE
