Baileigh SS-2421-V2, Руководство оператора

Страница: 34 / 64

31
31
ON-EDGE SHAPING
If the shaper fence does not firmly support wide stock,
use the existing bolts in the fence to attach a special
rigid high fence as shown in Figure 17.
Note: Be sure the bolt holes are
countersunk in the special fence.
STRAIGHTLINE BEVEL EDGE SHAPING
To perform a bevel edge cut, the infeed edge of the jig is
placed against the infeed fence and clamped to the table,
as shown in Figure 18.
The outfeed fence is moved forward as necessary to
compensate for the cut.
CONTOUR EDGE SHAPING WITH COLLAR BEARING
To shape contoured edges, the operator must first remove
the fence assembly.
In order to control the workpiece and limit the depth-of-cut,
the operator must use an anti-friction collar with the cutter
(s) as shown in Figure 19.