Baileigh MD-3510, Руководство оператора

Страница: 17 / 32

15
15
•
When you put the tool away, switch off the motor and ensure that all moving parts have
come to a complete stop.
•
DO NOT weld on any material that the drill is clamped to or drilling on.
•
Watch for hidden items behind the area to be machines. Hidden items such as wiring, pipes,
or other lose materials. Until you can verify that there is nothing hidden, always proceed as if
there are hidden objects.
•
When turned ON, the magnetic will produce magnetic fields, affecting some devices, such as
watches, mobile phones, pacemakers, etc.
•
NEVER turn the magnet OFF when the drill is running. The drill may twist and spin causing
damage to the drill and the material and possible injury to the operator and bystanders.
MACHINE SET-UP
Feed Handles
The handles are installed and removed whenever using the case to store and carry the drill.
•
Install each handle (A) the feed hub (B).
•
Hand tighten each handle.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
A
B