Baileigh DP-1000G, Руководство оператора

Страница: 10 / 48

7
7
11. Do not overreach . Maintain proper footing and balance at all times. DO NOT reach over or
across a running machine.
12. Stay alert . Watch what you are doing and use common sense. DO NOT operate any tool or
machine when you are tired.
13. Check for damaged parts . Before using any tool or machine, carefully check any part that
appears damaged. Check for alignment and binding of moving parts that may affect proper
machine operation.
14. Observe work area conditions . DO NOT use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lighted. DO NOT use electrically
powered tools in the presence of flammable gases or liquids.
15. Keep children away . Children must never be allowed in the work area. DO NOT let them
handle machines, tools, or extension cords.
16. Store idle equipment . When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep them out of reach of children.
17. DO NOT operate machine if under the influence of alcohol or drugs . Read warning
labels on prescriptions. If there is any doubt, DO NOT operate the machine.
18. DO NOT touch live electrical components or parts.
19. Turn off power before checking, cleaning, or replacing any parts.
20. Be sure all equipment is properly installed and grounded according to national, state, and
local codes.
21. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
22. DO NOT bypass or defeat any safety interlock systems.
23. Keep visitors a safe distance from the work area.
MACHINE DESCRIPTION
The Baileigh DP-1000G is a very economical gear head drill press that can run in any
fabrication or machine shop using only 110 volts of power. It can drill through mild steel with up
to a 1" (25.4mm) drill bit. It comes standard with a heavy cast iron base and adjustable table.
To reduce flexing this gear head drill press uses a column with a 4” (101.6mm) diameter. The
gear head also can be adjusted up or down on the column. The transmission offers multiple
speeds that are perfect for drilling and tapping an array of different materials. The DP-1000G
comes standard with a halogen light and protective guarding.