Baileigh BG-142S, Руководство оператора

Страница: 21 / 48

19
19
OPERATION
Operating controls
•
On/off switch (A) with safety key
– Pull up to start
motor, push down to stop.
Important: To prevent accidental or
unauthorized starting of grinder, shut off machine and
pull out key (yellow portion) of switch and store in
safe place. This key must be reinserted to start
machine.
•
Overload reset (B)
– If motor overheats, allow
machine a few minutes to cool down, then push
button to reset.
General operating tips
•
Always use platen when grinding workpiece.
•
Adjust gap between work rest and belt to 1/16-inch or less.
•
Handles must be tight and covers closed before operating.
•
Some metals may create a fire hazard during grinding; consult workpiece supplier for
instructions on proper use and cautions.
•
Allow machine to come up to speed before applying workpiece.
•
Place workpiece upon work rest and apply only moderate pressure into abrasive belt; do not
apply excessive pressure.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
When handling large heavy materials make sure they are properly supported.
A
B