Baileigh BG-142S, Руководство оператора

Страница: 17 / 48

15
15
•
POWER SUPPLY PLACEMENT: The power supply should be located close enough to the
machine so that the power cord is not in an area where it would cause a tripping hazard. Be
sure to observe all electrical codes if installing new circuits and/or outlets.
When mount the Baileigh machine on a workbench be aware of the following:
•
Overall weight of the machine and the weight of material being processed.
•
Make sure the workbench is properly reinforced to support the total weight.
•
The strongest mounting option is where the holes are drilled all the way through the
workbench and the machine is secured with bolts, washers, and nuts.
Mounting Dimensions
A B C
BG-124S Ø
0.433” (11mm)
12
.598” (320mm)
13
.385” (340mm)
BG-248S
Ø
0.433” (11mm)
12
.598” (320mm)
13
.385” (340mm)
BG-260S
Ø
0.433” (11mm)
12
.598” (320mm)
14
.960” (380mm)