Baileigh Industrial TS-1040P-30-V2, Руководство оператора

Страница: 33 / 60

30
30
Dust collection
It is recommended that you use a dust collector (not
included) when using this machine. The minimum air
flow requirements for this machine are listed below.
The machine comes with a 4” (100mm) dust port
located on the side of the machine.
The dust extraction equipment is to be switched on
before commencing machining.
Air current speed is 20m/s for vacuum suction dust
emission index.
When air current speed of dust collector device (in
accordance with EN12779:2004) is not lower than
20m/s, ensure machine can be normal exhausted.
User must wear dustproof mask.
1. Required air flow: 1500 m3/h.
2. Ensure pressure drop of each dust collector outlet carrying air current speed: 1100Pa.
3. Wind speed of dust collector tube m/s:
Dry Chips: 20m/s,
Wet chips: 28m/s (water content is equal to18%)