16
16
•
Press [G]: Modify the current fixed-length fixed long-distance move.
•
[START ([F9]): Start cutting.
•
[STOP ([F10]): Parking, the system can suspend all on-going actions.
Cutting Operation Index
•
[F1]: The torch moves back along the cutting path.
•
[F2]: The torch moves forward along the cutting path.
•
[F3]: Return to the starting point of cutting torch, i.e., the starting point
of the current workpiece.
•
[F4]: Decrease the cutting speed, each press will decrease the speed
by 1%.
•
[F5]: Increase the cutting speed, each press will increase the speed by
1%.
•
[F6]: Reduce the preheat time, skip the remaining preheat time, and the
system automatically records preheat time.
•
[F7]: Increase the preheat time once every 15 seconds.
•
[F8]: When the system is suspended, for selecting perforation point;
when the system begins to move, for the dynamic amplification.
•
Four direction keys (Up, down, left and right): Use to manually move the
torch.
Speed Control and Adjustment
Normal Speed Adjustment
In automatic operation, or when the system is suspended, in the cutting
interface the system can regulate speed.
On the operation screen, press and release the [F5] or [PRE], will increase
the speed at a rate of 1% per click. Press and hold the [F5] or [PRE], the
speed rate will continuously increase to 100%. The 100% speed rate will
be equal to the cutting speed set within the “Setup” parameter.
On the operation screen, press and release the [F4] or [NEXT], will
decrease the speed at a rate of 1% per click. Press and hold the [F4] or [NEXT], the speed rate
will continuously decrease to 1%.
Quick Speed Adjustment
In automatic operation, or when the system is suspended, in the cutting interface the system can
carry out quick speed regulation.
