10
10
•
According to plate thickness, the cutting speed is automatically restricted by a speed limit in
the corner, effectively preventing over burn.
•
Select row and column manually.
•
Dynamic/static illustration of the process, graphics zoom in / out, dynamically tracking cut-off
point under zooming state.
•
Starting speed and acceleration can be set by your convenience.
•
Automatically memorize the working situation and the last cutting point when powered off.
•
"Cutting offset" function can avoid wasting the steel plate when the nesting of the plate is
calculated wrong.
Technical Standard
•
Control Axis: 2
•
Control accuracy: +/-0.001mm
•
Coordinate range: +/- 99999.999mm
•
Maximum pulses: 200kHz
•
Maximum speed: 15000 mm/m
•
Maximum lines of code: 150000 lines
•
Maximum size of single code file: 4MByte
•
Time resolution: 10ms
•
Working Voltage: DC 24V in put
•
Working Temperature: -10
℃
- 60
℃
.
•
Relative Humidity: 0 - 95%.
System Interface
•
15 pins interface of 2 axis of the motor drive.
•
25 pins interface of 16 channels optical couple output ports, max back flow current 300mA.
•
25 pins interface of 16 channels optical couple input ports, max output current 300mA.
•
USB interface on the front panel.
•
Extend IO input/output ports, PWM input ports, and analog input ports.
