Baileigh Industrial DP-1000G, Руководство оператора

Страница: 23 / 44

20
20
LUBRICATION AND MAINTENANCE
Daily Maintenance
•
Inspect the power plug and cord.
•
Keep area around machine clear of debris.
•
Check daily for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
Weekly Maintenance
•
Lubricate threaded components and sliding devices.
•
Apply rust inhibitive lubricant to all non-painted surfaces.
•
On a weekly basis clean the machine and the area around it.
Monthly Maintenance
•
Check that all screws on the motor and the guard are tight and secure.
•
Check that the guard is operating properly.
•
Grease the gear rack on the column so the table moves up and down smoothly.
Greasing the Machine
•
Grease the gear rack on the column to keep the table moving smoothly.
•
Lubricate the spline of the spindle and the teeth of the rack with a #2 grease.
•
Fully extend the spindle and lightly grease the spindle shaft.
Storing Machine for Extended Period of Time
If the Drill Press is to be inactive for a long period of time, prepare the machine as follows:
•
Detach the plug from the electrical supply panel.
•
Clean and grease the machine.
•
Cover the machine.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.