Baileigh Industrial BB-9616M, Руководство оператора

Страница: 37 / 40

35
35
Electrical Components
SB1 Red Stop Push Button - NC Contact
KM1
Contactor, CU-16, Primary coil activation circuit. Creates light clamping
pressure.
KM2
Contactor, CU-16, Primary coil activation circuit. Creates full clamping
pressure.
Control Board
Control Board, Holds components C1, C2, C3, C4, D1, KS50, R1, and
R2. Controls current to the magnet coil.
KPBC2 Bridge Rectifier
– Magnetize
KPBC1 Bridge Rectifier
– De-Magnetize
SB2, SB3, SB4 Green Start Push Button
– NO Contact, Center, Right End, Left End
SA2 Toggle Switch, Clamping Force
FR Thermal Switch
KT
Timer Relay, Engages KA2 relay for 3 seconds when stop button is
pushed.
SQ Limit Switch, Handle Down
SA Rocker Switch, Power On/Off
TC Transformer, Pri.220V, 30VA, 50/60hz
– Sec.12V
JK1, JK2 Foot Pedal Switch - NO Contacts
QF1 2 Pole Breaker
KA1 Relay, 10A, Engages stop circuit from the foot pedal.
KA2
Relay, 10A, Engages the demagnification circuit from the timer for three
seconds.