Nova846 Outdoor 8x5W Two-Carrier TDD eNodeB Installation Guide
11
Power plug
The plug that connects the power cable to the electricity supply
Ethernet cable
Outdoor CAT6, shorter than 328 feet (100 meters)
It is suggested that the diameter of the cable is .3 inches ± .04 inches
(7 mm ± 1 mm).
Ground cable
•
If the length of lead is more than 33 feet (10 meters), 6 AWG (10 mm²)
grounding cable should be used.
•
If the length of the lead is less than 33 feet (10 meters), 10 AWG
(10 mm²) grounding cable should be used.
RF antenna cable
50 ohm feeder, ½ jumper
RF antenna
Omni or directional dual polarized antenna
Optical fiber
Optical fiber (armor). It is suggested that the diameter of the cable is
.3 inches ± .04 inches (7 mm ± 1 mm).
Table 2-2: Installation Tools
Level bar
Marker pen
Knife
Pliers
Wrench
Percussion drill and
drill heads
Hammer
Phillips-head
screwdriver
Cable vice (crimper)
Tape measure
0.05 cm (5 mm) L-
shape Allen wrench
T7 screwdriver head
2.2 LEDs and Interfaces
Figure 2-2, Table 2-3, and Table 2-4 explain the eNB's LED status indicators and interfaces.