16
Figure 3-4: GPS Mounting Bracket 2
3.
Fix the GPS mounting bracket 1 on the eNB using an M4 screw and according to the
required angle (Figure 3-5).
Figure 3-5: GPS Mounting Bracket 1
4.
Fix the GPS antenna on the GPS mounting bracket 1 using an M4 screw (Figure 3-6).
Vertical installation is required. Figure 3-7 shows the completed installation of the GPS
antenna on the top of the eNB.
Figure 3-6: GPS Antenna
Figure 3-7: Completed GPS Antenna Installation
5.
Connect the GPS connector cable to the eNB GPS port, as shown in Figure 3-8.
Figure 3-8: Connect GPS Antenna to eNB Port
