Bahco TEA003, Оригинальное руководство пользователя

Страница: 8 / 204

TEA003 / TEA010 / TEA030 / TEA065 / TEA350 / TEA1100 / TEA2100
4.10 Using the Instrument
1. Select mode of operation
2. Select target
3. Select units
4. Place torque screwdriver / torque wrench in the input drive and operate in the desired direction
5. Remove the torque screwdriver / torque wrench and zero the display (if required) by pressing
the RESET button
6. Place the torque screwdriver / torque wrench in the input drive and operate in the desired
direction
1. Text colour (Low = Yellow, Pass = Green, High = Red)
2. Target icons (Low = , Pass =
ü
, High = )
3. Target indicator line
Example
Target 1 (T01) Set to 200.0 N·m ±3% (194.0 – 206.0 N·m)
Mode set to Click
First Reading 190.7 N·m (LOW)
Second Reading 202.1 N·m (PASS)
Third Reading 212.4 N·m (HIGH)
Clockwise
Below
tolerance band
The 2 lines closest to the
centre line indicate the
argets tolerance band (±3%)
The target indicator line is
scaled to show ±20% centred
on the target value (200 N·m)
Low
Pass
In tolerance band
Above tolerance band
High