Page 8/24
Operating Instructions
BA 7020
Technical specifications subject to change without notice
Copyright according to ISO 16016
2.3 Accessories and options
●
Free parameterisation software (Modbus RTU) - Interface RS 485 required!
●
For laptops with USB we recommend our interface convertor (Order No. 5280-051).
2.4 Operating conditions
Positioners and related actuators are suitable for installation in industrial plants and in waterworks
and power plants with a low pollutant concentration.
For use outdoors or in an environment with a high pollutant concentration, such as areas with heavy traffic,
industrial areas (chemical plants, sewage plants, etc.), coastal areas and the open sea, the actuators must have
external parts made of non-corrosive material and must be provided with a special coating.
When used outdoors, the actuator must be protected with an additional cover against
●
rain
●
direct sunlight
●
strong draughts
●
dust
3. TRANSPORT AND STORAGE
Risk of injury caused by failure to observe the safety regulations!
Caution
●
Wear the required personal and other protective equipment.
● Protect the positioner from impacts, shock, vibration and similar influences.
●
Store the positioner (and, if necessary, the complete actuator/valve assembly) in a dry place.
●
Observe transport and storage temperatures: -25°C to +65°C.
Attention
