Page 12
For technical questions, please call 1-888-866-5797.
Item 63770
S
AFET
y
O
PERA
T
iO
n
M
A
in
TE
n
A
n
CE
S
ET
u
P
13. Operate the Pendant controls briefly to ensure
they work properly, see Figure L. If operation is
reversed, the power cables may be connected
backwards. Correct any such issue before use.
Figure L: Pendant controls
14. When it is safe to do so, use the power switch on
the Pendant Controller to retract the wire rope, and
winch the as desired.
Do not power the hook all
the way into the fairlead to prevent damage.
15. Do not operate the winch at extreme angles.
Do not exceed the angles shown in Figure B for
a roller fairlead. For a hawse fairlead, the angle
should be as close to straight as possible.
45°
45°
15°
15°
FiGuRE B: ROLLER FAiRLEAD
MAXiMuM WinCHinG AnGLES
16. If the object to be pulled must be pulled at an
angle in relation to the winch, use a pulley
(sold separately) and an anchor point directly
in front of the winch, as shown in Figure C,
to keep the Wire Rope pull straight.
FiGuRE C: PuLLEy AnCHORinG
17.
WARninG!
Stop the winch and release
tension on the wire rope before moving
the rag or carpet placed on it.
18. Do not continue use of the winch until
the battery is completely run down.
19. You may wish to keep the engine running while
using this winch, to continually recharge the battery.
However, exercise extreme caution when
working around a running vehicle and ONLY
operate a vehicle in an outdoor area.
CAuTiOn!
Do not use the winch in a
constant duty application, it is designed for
inTERMiTTEnT uSE OnLy. Keep the duration
of the pulling job as short as possible. if the
motor becomes very hot to the touch, stop and
let it cool down for several minutes. Do not pull
for more than one minute at or near the rated
load. Do not maintain power to the Winch if
the motor stalls. Double Line Rigging will help
prevent overloading and should be used whenever
practical, see Double Line Rigging on page 11.
20. When finished pulling the load, reverse the direction
of the winch just enough to release tension on
the Wire Rope so that you can unfasten the
Hook from the load and reel in the Wire Rope.
