Badger Meter MN Series, Инструкция по эксплуатации

Страница: 11 / 28

Configuration / setup
November 2014 AC_F110_BA_02_1346 Page 7
6.3.3 TO RETURN TO THE OPERATOR LEVEL
Press for 3 seconds
6.3.4 FUNCTIONS OVERVIEW OF THE SETUP LEVEL
14 Decimals K-factor: 0-6
13 K-factor: 0.000010 - 9,999,999
12 Decimals: 0 - 1 - 2 -3
1 Total 11 Unit: L - m 3 - kg - lb - GAL - USGAL - bbl - no unit
27 Cut-off: 0.1 - 999.9 seconds
26 Calculation: per 1 - 99 pulses
25 Decimals K-factor: 0 – 6
24 K-factor: 0.000010 - 9,999,999
23 Decimals: 0 - 1
22 Time unit: sec - min - hour - day
2 Flow rate 21 Unit: L – m
3
– kg – lb – GAL – ton – bbl – no unit
3 Display 31 Function: total – flow rate
42 Battery mode: operation - shelf
4 Power management 41 LCD update: fast - 1sec - 3sec -15sec - 30sec
52 Maximum frequency: 1 – 9,999 Hz
51 Signal: NPN - NPN_LP - Reed - Reed_LP
5 Flow meter NAMUR_LP – COIL HI – COIL LO
63 20MA – flow rate: 0.1 – 9,999.9
62 4mA – Flow rate: 0.1 – 9,999.9
6 Analog 61 Output: enable - disable
71 Pulse width: short – long – off
7 Pulse 72 Pulse: X,XXX,XXX quantity
84 Protocol: Modbus – off
83 Mode: ASCII – RTU
82 Address: 0 – 250
8 Communication 81 Speed: 1200 – 2400 – 4800 - 9600
97 Tag number: 0000000 – 9999
96 Date
95 Time
94 Password: 000 – 9999
93 Serial No.
92 Software version
9 Others 91 Type/model