CXX-UM-01850-EN-01
Front Panel Test Mode
OTEE:
N
You must use the front panel keypad to enter
Front Panel Test
mode
Use
Front Panel Test
mode to enable or disable the remote, test the remote reception, view the Serial number, and turn the
audible keyclick ON or OFF
Press
LEFT/OIGHT
arrows on the front panel at the same time to enter
Front Panel Test
mode Press
UP/DOWN
arrows to
display the menu options Press
ALTEO
to toggle each option
Menu Option
Description
ENABLE IR
Enable or disable the remote control
KEY CLICK
Enable or disable the audible keyclick
TEST REMOTE
Test the remote control The last input is displayed on the right
MAN 0000
Display the serial number of your computer
ALTER TO EXIT
Press
ALTEO
to exit
Front Panel Test
mode
Disabling and Enabling the Oemote Control
Since the remote control works with any COX computer, it may be necessary to disable the remote control function on
one computer when there are multiple computers in close proximity Use
Front Panel Test
mode to disable the remote
control function:
1 Press
LEFT/OIGHT
arrows on the front panel at the same time to enter the
Front Panel Test
mode
2 Press
UP/DOWN
arrows to highlight
ENABLE IR
3 Press
ALTEO
to select
N
for
ENABLE IR
Once locked out, the lock LED light in the lower square panel of the flow computer lights up and the remote control does not
affect the locked computer
OTEE:
N
With the remote off, the menus of the flow computer can be viewed using the front panel keypad, but anything that
requires the remote is not available
To restore remote control function, use the same process, but select
Y
for the
ENABLE IR
option
Troubleshooting the Oemote Control
If you enter a code to access the programming mode and the computer displays
WRONG CODE
, check the code and re-enter If
the code is correct and the computer still shows
WRONG CODE
, the remote control batteries may need changing
If you are experiencing key bounce or you are unable to use the remote control keys, there is probably interference Problems
may occur when trying to operate the remote control in direct sunlight, or while using sodium lights or other specialized
lighting If problems continue, please contact your supplier
Operating the Flow Computer
Page 13
February 2018
