OPEOATING THE MONITOO
The monitor has two modes of operation referred to as the
RUN
mode and the
PROGRAM
mode Both the
RUN
mode and the
PROGRAM
mode display screen enunciators confirm the state of the monitor A quick glance at the lower left corner of the
LCD screen will confirm operating status Normal operation is in the
RUN
mode To access the
PROGRAM
mode, press
MENU
until the first programming screen is displayed After programming the display with the necessary information, turn on the
lock out feature to prevent unauthorized access or changing the meter’s setup parameters
MENU
ENTER
Figure 3: Front panel
Buttons
MENU
Enters and exits
PROGRAM
mode
UP
Scrolls forward through the parameter options, increments numeric variables and scrolls
backward through parameters
OIGHT
Scrolls backward through the parameter options, moves the active digit to the right and
scrolls forward through parameters
ENTEO
Saves programming information, advances to the next programming parameter, and
used in the reset process
Modes
OUN
Normal operating mode
POOGOAM
Used to program parameters in the display
Operating The Monitor
Page 7
March 2017
DSY-PM-00279-EN-03
