background image

**TO AVOID POTENTIAL SCRATCHING TO PARTS BY ROUGH GROUND SURFACE, COVER GROUND 

WITH SOFT SMOOTH PROTECTIVE MATERIAL ON WHICH TO PLACE PARTS DURING ASSEMBLY. **

Step 1:  Remove protective wrapping  and lay all parts on ground. Identify all parts packed in carton against  the 
parts list.

Step 2: Lay Table Top Frame (A) upside down on ground, so bottom is facing up. 

Step 3: Then attach each of four Legs (B) to the Top as shown in Diagram 1, using Bolts (E) and Washers (F).  
Attach Stretcher (C) to Legs (B) using Bolts (E) and Washers (F) as shown in Diagram 2.  To make sure everything 
fits properly, do not tighten all bolts until they are all properly in place.  Use Hex Wrench (H) to tighen all Bolts. 

Step 4: Make sure all bolts are aligned properly and tightened securely. Then place Bolt Covers (G) over bolts.  
Turn the table to upright position on flat surface and put Glass Top (D) on Top Frame (A) as shown in Diagram 3. 

NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED PROPERLY 
AND SECURELY.

Shorewood High Bistro Table

Item #2722241 / M22105HD

Assembly Instructions

WARNING!:  TABLE IS NOT MEANT FOR SITTING OR STANDING ON.   DO NOT SIT/STAND ON OR LEAN FULL 
BODY AGAINST TABLE.   IMPROPER USE MAY LEAD TO PRODUCT DAMAGE AND/OR BODILY INJURY. 

       Diagram 1

A

B

F

E

G

1 of 2

Отзывы: