Bacharach The Informant2, Руководство по эксплуатации и обслуживанию

Страница: 11 / 32

The Informant™ 2
0019-9211 Rev 9 7
2.4. Combustibles Sensor Installation
Install the combustibles sensor, filter, and “red” probe tip onto the end of
the detector’s flexible probe as shown in Figure 3b. Observe the red
color coding on both the sensor and probe tip.
NOTE: The Informant 2 is intrinsically safe only when its
combustibles sensor is installed.
Figure 3b. Sensor Installation (Combustibles Sensor)
2.5. Turning the Detector On and Off
See Figure 4. The detector is toggled ON and OFF by pressing the
POWER button.
When first turned on, observe that the Power LED glows and that all
other LEDs are tested by being turned on for 1 second.
The detector requires 10 seconds to warm up. After which time all LEDs
should be off except for the Power LED, along with the probe tip blinking
and audible indicator ticking at approximately once-per-second.