PN #3015-6142 REV 2
WARNING:
Make certain that the power source is
disconnected
(Circuit Breaker or Fused Disconnect Switch)
from the Multi-Zone before installing the Multi-Zone
Tower Light. Failure to do so presents an electrical shock
hazard to personnel and could damage to the Multi-Zone
and the Multi-Zone Tower Light.
Installation
Guide
Multi-Zone Tower Light
with Audible Alarm
PN #3015-6143
1. Introduction
The Multi-Zone Tower Light is a three color tower light that can be
wired into the alarm and fault relays of the Multi-Zone for enhanced
visual and audible alarming. The tower light includes a 90 dB omni-
directional audible alarm.
Please read and strictly follow the contents of this document for
information on the installation of tower light.
For more detailed product information, scan here
or visit
www.mybacharach.com
to access the
Multi-Zone User Manual
(P/N: 3015-5074)
.
2. Safety Instructions
1.
Install the tower light into one of the knock-out holes in
the top of the Multi-Zone, securing it using the provided
gasket and mounting nut.
3. Installation
2.
Install the modified Multi-Zone power harness into
locations show in the picture below.
The end of the power harness with the loose leads
(RED
and BLACK)
should be landed on the jumper on the main
controller board.
Gasket
Mounting Nut
(Inside Enclosure)
Red
Yellow
Green
Connect to Power
Supply 12VDC Header
End of Power Harness
with Loose Leads
Flying Leads
Black
Red
