Bacharach Monoxor Plus Скачать руководство пользователя страница 39

Страница: 39 / 57

Operation

Monoxor



Plus Manual

0019-9370 Rev 1

4.6. Taking Differential Temperature Measurements

In certain combustion applications, it may be desirable to have a differential

temperature measurement. Use the Diff Temp menu and either the optional

probe assembly with thermocouple (P/N 0019-7111), or one of the optional K-

Type thermocouples (P/N 0104-1798 or P/N 0104-1797) to accomplish this

task.
The Monoxor



Plus calculates the differential temperature based on two

sampled temperatures (T1 and T2) which it reads from the optional probe

assembly’s thermocouple (which is connected to the T-STACK connector of the

instrument). After you take the two sample readings, the differential value

(T1-T2) is calculated, optionally saved in memory, displayed on the main run

screen, and is shown on printouts. Use the following procedure to perform a

differential temperature measurement.

Step

Example Procedure for Taking Differential Temperature Measurements

Attach the thermocouple plug of the optional probe assembly to the
T-STACK connector on the bottom of the Monoxor



Plus.

From the Main Menu, select the Diff Temp option. When this option is

first selected, the current temperature (Temp) is displayed. Values for T1

and T2 will show no readings until they are saved by the operator, after

which a differential value (T1-T2) will also be displayed.

With T1 highlighted, position the probe at desired location #1.

After a T1 temperature reading is displayed and stabilizes, press the F3

(SAVE) button to store the current T1 temperature reading. The T2

temperature reading is highlighted.

Move the probe to desired location #2.

After a T2 temperature reading is displayed and stabilizes, press the F3

(SAVE) button to store the current T2 temperature reading.

The temperature differential temperature (T1-T2) will be displayed.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание Monoxor Plus


























































Результаты поиска

Содержание Monoxor Plus

Отзывы:

Bacharach Monoxor Plus, Руководство по конфигурации и эксплуатации, Страница: 39 / 57

Результаты поиска

Содержание Monoxor Plus

Отзывы: