background image

Instruction 55-9002

33

Gas Pup

Accessories

Barhole Probe Assemblies:

30" polycarbonate probe ............................................................... 55-3001

30" aluminum probe ..................................................................3474-1210

Cap, Vinyl Tip (for polycarbonage probe tube) ........................... 05-4751

Calibration Kits:

Includes on-demand regulator, 3 feet of  ¼" tubing, and

a quick-connect female fitting...................................................... 55-8002

On-demand regulator only ........................................................... 55-0064

Calibration Gas:

- Zero Air, 20.9% O

2

 in air, 103 L Tank ....................................... 51-7131

- 2.5 ±0.03% Methane in air, 103 L Tank .................................... 51-1121

- 100 ±2% Methane, 58 L Tank .................................................... 55-0060

Carrying Cases:

Hard Plastic Carrying Case:

 Provides storage space for the

instrument, gas probe and hose, and other miscellaneous

accessories ..................................................................................... 55-0039

Soft Carrying Case: 

Holds the instrument and gas probe,

supplied with a shoulder strap .................................................... 55-0044

Check Gas:

 500 ppm Methane, 103 L Tank .................................... 51-1816

Filters 

(fits inside filter chamber of gas probe):

Foam Filter Element

 (package of 10): Protects against

dust and dirt from entering the instrument’s gas tubing. ......5500-7100

Charcoal Filter Pack

 (package of 10): Provides the ability

to detect the difference between petroleum vapors and

natural gas. ................................................................................5500-7400

Pressure Hose Kit:

 Includes a 48" coiled polyurethane tube

with a quick-connect female fitting on one end and a quick-

connect insert plug on the other. Also includes a 

1

/

8

-NPT

quick-connect socket. Use this kit to check regulator

pressure and gas pressure in piping............................................ 55-0038

Service Line Pressure Testing Kit:

  Includes two 2-foot

sections of ¼" tubing, tee with pressure value,

quick-connect male fittings on each end of tubing,

plus an 

1

/

8

-NPT quick-connect socket. Use this kit to

pressure prove new and repaired piping where the piping

is pressurized with air and then monitored for leakage. ........... 55-0072

Socket, Quick-Connect, 

1

/

4

-NPT

 (use on 55-0038 & 55-0072) ......103-5386

Socket, Quick-Connect, 

1

/

8

-NPT

 (part of  55-0038 & 55-0072) ....103-5396

Tubing Coupler:

 Provides the ability to couple together two

sections of tubing that have quick-connect female fittings ........ 55-0046

Water Trap Assembly

...................................................................... 55-0063

Particulate Filter 

(package of 3)................................................ 07-1644

Parts & Service

Содержание Gas Pup













































Отзывы: