9
10
ASSEMBLY
ASSEMBLY
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ATTACH TRAY
WARNING:
Always check
that the high chair is locked in
the open position before using.
WARNING:
The tray is not
designed to hold the child in
the chair. The child should be
secured in the high chair at all
times by the 5-point restraining
system, either in the reclining,
semi-reclining or upright
position.
10)
• To attach the Tray, line up the grooves on
the bottom of the tray with the armrests of the
high chair. Squeeze the Tray’s release handle
and slide the tray onto the armrests (Fig.
10a). The Tray has a 3-position adjustment.
To adjust the position, squeeze the Tray’s
release handle located underneath the tray
and reposition the tray to the desired position
(Fig. 10b). Release the Tray’s handle. Check
that the Tray is securely locked in its new
position.
TO ATTACH TRAY INSERT
11)
• The dishwasher safe food Tray Insert snaps
onto the High Chair Tray and is held in place
by tabs on the sides of the Tray (Fig. 11a).
When installing the Tray Insert make sure
that its snaps into place to prevent the child
from removing the Tray Insert. To remove
Insert, unsnap the tabs from the Tray.
• The Tray may be stored on the back legs of
the High Chair. Align the holes in the rear of
the tray with the small pegs on the back legs
(Fig. 11b).
Fig. 11b
Fig. 11a
Fig. 10b
3-position
Tray Release located underneath tray
Fig. 10a
TO USE SAFETY BELT
WARNING:
The highchair should
be used only by children capable of
sitting upright unassisted and at least 6
months of age.
WARNING:
Prevent serious
injury or death from falls or sliding out.
Always use the restraint system. The
child should be secured in the high chair
at all times by the 5-point restraining
system, either in the reclining, semi-
reclining or upright position.
12)
• The shoulder straps of the 5-point harness have 2
attachment positions. Select the position that places
the shoulder strap level with, or below, the top of the
child’s shoulders (Fig. 12a).
• Carefully place the child in the seat and position the
safety harness around the child’s waist and over
the shoulders. Place the crotch strap between the
child’s legs. Insert the male end of each shoulder/
waist belt into the buckle on the crotch strap.
Tighten the harness to be snug around the child’s
waist and over the child’s shoulders (Fig. 12b).
TO RELEASE SAFETY BELT
13)
• Push Button on Center Clasp, the two Harness
Buckles will pop free (Fig. 13).
RECLINE SEAT
14)
• Squeeze recline lever on back of the seat and
adjust to the preferred recline or upright position
(Fig. 14).
Use caution not to trap arms, hands and fingers
when adjusting recline positions.
Fig. 14
Fig. 12a
Fig. 12b
Adjust for a snug fit
Fig. 13
Center Clasp
