TO USE SAFETY BELT
Step 1.
The shoulder straps of the 5-point harness have 2 attachment
positions. Select the position that places the shoulder strap level with,
or below, the top of the child’s shoulder.
Step 2.
Carefully place the child in the seat and bring the safety harness
around the child’s waist and over the shoulders. Place the crotch strap
between the child’s legs. Insert the male end of each shoulder / waist
belt into the buckle on the crotch strap. Tighten the harness to be snug
around the child’s waist and over the child’s shoulders. To release
squeeze sides of buckles. Please see figure 5.
WARNING:
Avoid serious injury
from falling or sliding out. Always use the
safety harness.
WARNING:
Do not adjust seat height
with child in seat. Adjust seat height before plac-
ing your child in the high chair.
TO ADJUST SEAT HEIGHT
Step 1.
Squeeze the buttons on the height adjustment bracket and adjust to the
ideal position. (see Fig. 7)
WARNING:
Always check that the
height adjustment bracket is level and both left
and right sides locked before placing child in the
high chair.
TO FOLD HIGH CHAIR
The high chair may be folded with the seat in any of the height posi-
tions. The high chair will be the most compact with the seat in the
lowest position.
Step 1.
Place seat in the desired height position (see Fig. 7).
Step 2.
Place seat back in the most upright position. (see Fig 4).
Step 3.
Squeeze the tray release handle and slide the tray out. (see Fig 2).
Hang the tray on the hooks located on the back of the rear leg. (see
Fig. 8)
Step 4.
Pull upward on the release levers (located on the sides of the frame)
and push the rear legs in the direction of the front legs until folded.
(see Fig. 9) Chair is now ready to put away. DO NOT allow your
child to play around a folded high chair as it may fall.
6-positions
Figure 5
Figure 7
Figure 8
Figure 9
7
Shoulder Strap
Squeeze
Crotch Strap
Waist
Strap
Adjust for a
snug fit
