4.7 Adjust the ISOFIX attachments
The ISOFIX attachments can be adjusted for many positions to fit the
different positions of ISOFIX low anchorages expending from car
seat. As the picture shows, lift the ISOFIX adjuster button in front of
the child seat up, the ISOFIX attachment of both sides will eject to
the longest position. latch both of the ISOFIX attachments with the
corresponding ISOFIX lower anchorages. When you hear a “click”
means that the ISOFIX attachments and the ISOFIX lower
anchorages are all latched completely .Meanwhile the ISOFIX
latching indication shows GREEN (see picture). If you want to
release the ISOFIX attachments, just need to push the ISOFIX
release button(see picture).So the installation of the ISOFIX
attachments is finished. Next, you can lift the ISOFIX adjuster button
up again and push the child seat towards the car seat backrest until
it is firmly pressed against the car seat backrest. Now the installation
of the ISOFIX base is finished.
Except the first position (the longest position) has the
locking system, need to be adjusted by lifting the ISOFIX adjuster
button, other positions can be adjusted just by pushing the ISOFIX
base directly.
Important:
The longest position
The shortest position
4.8 Assemble and separate the ISOFIX base and backrest
This child seat can be installed rearward-facing and forward-facing. If
you want to separate the ISOFIX base and backrest, just need to push
the seat release button, then the seat locking button locked into the top
cover of the base and the backrest can be separated from the base. If
assemble the ISOFIX base and backrest, latch two shafts with the
corresponding anchor points.Then press the seat locking button and it
can eject from the locked position of the top cover. Now the child seat
latching indication shows GREEN.
Make sure the child seat latching indication shows GREEN
by shaking the backrest.
Important:
Locking seat
Release seat
7
8