BaByliss 7865U, Руководство пользователя

Страница: 6 / 12

Cordless Operation
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch on. The blue LED will flash when the adaptor
is correctly inserted into the appliance and connected to the mains.
• Once the appliance is fully charged, the blue LED will stay on. Unplug
the adaptor from the mains socket and appliance and prepare for
use.
Using the Length Control Dial
The length control dial allows you to adjust the
comb guide to change the cutting length of your
trimmer. You’ll need to experiment to find your
preferred length, but as a guide, 1mm will give
you a very short stubble beard and 12mm will
be thicker and longer.
• Select a cutting length (1-12mm) using the
dial on the front of the trimmer. Turning the
dial clockwise will increase the cutting length.
Turning it anti-clockwise will decrease the
cutting length.
• Once you have selected your desired cutting
length, the guide automatically locks into
position for a guaranteed, even cut.
• Switch the trimmer on by sliding the power
button up, the blades will start to move and
you can begin trimming.
Using the trimmer without the comb guide
• The trimmer can also be used for detailing/shaping around the edge
of the beard.
• To remove the comb guide, place two fingers either side of the wheel
and gently pull to the guide.
• Pull the guide up and away from the trimmer unit.