15
16
Copyright © 2021, Baby Trend, Inc.
Copyright © 2021, Baby Trend, Inc.
4.1 Assembling the Car Seat
Attaching the Canopy
Slip the canopy stays through
the sleeves on the canopy.
The canopy is attached by inserting the ends
of the canopy plastic stays into the female
fittings found on the inside of the handle hub.
4.0 Preparing Car Seat for Use
3.0 Features and Benefits
2. Install the small infant insert
only when the child is removed
from the infant carrier.
- Pull back lower half of the
seat pad (Fig. 15-1).
3. Place the small infant insert
between harness straps and crotch
buckle as shown in (Fig. 15-2).
4. Lower the seat pad and fasten
around infant car seat.
5. Place child in infant car seat
and check if child’s shoulder is
even or above the lowest slot.
SMALL INFANT
INSERT
15-2
15-1
Be sure harness straps locate
into notches on sides of insert.
Text imprint on the small infant
insert, always faces up.